T-Soft is easy to handle. After only a short period of time, T-Soft can be used to solv problems in the drivline, to select the right roller weights, for tuning and optimising.

Two files can be loaded, before and after the repair for example. Each curve can be made visible or unvisible. With a click on an interesting point of the curve the details will be shown on the right display.

1. display for measurement 1 (Original 6.5gr / bright colors)
2. display for measurement 2 (no file = empty / dark colors)
3. data-ruler

On the following example you can see:

• red line =enguine speed
  
• blue line = kW (rear wheel)
• green line = Nm
• yellow line = gear (revolutions per driven meter)
• purple linie = load line (kW needed for acceleration on plane street, no wind, type and weight of the motorcycle and driver is adjustable)
  

One click on a curve, the ruler appears and the values are shown on the display (here at 29,9 km/h).
There are three dimensions: time in seconds, velocity in km/h (this example) or engine speed in rpm (important for motorcycles with manual gears or tuning of scooter engines).
On the left side is zero and on the right side is the maximum.

Examples