Banner

News


Visit us at EUROBIKE 2020 from November 24th, 2020 to November 26th, 2020 Hall B1 Stand: B1-312

Here you can test the new Speed-Bull!


Due to the lack of demonstrations, you can order a Speed Bull, test it and pay the rest if you keep the device. More: www.speed-bull.com

21.10.2020



On Saturday, September 12th, 2020 we were at the first German e-MTB championship for the technical inspection of e-bikes in Daun. It was not about the performance test, but about checking at what speed the support switches off. Due to many inquiries, the procedure is explained here:

before the race, the vehicle is rolled down a simulated mountain on the testbench until it has reached 28 km/h. After the assistance has started, the driver begins to pedal. Then the speed is reduced until the assistance starts. As soon as this has been determined, the speed is checked and the measurement is ended. Vehicles that reached unauthorized high shutdown speeds (manipulations) were not detected.


The battery is hardly loaded due to the energy consumption of a few watt seconds and is the same for all e-bikes. During the measurement, e.g. an average of 200 W vehicle power measured over three seconds. This is 600 Wsec, which corresponds to 0.17 Wh. So if a battery has an energy of 400 Wh, 0.04% is required for this measurement.

Should a driver/vehicle finishes extremely quickly, it would be tested again more precisely after the race. Possibly even with controlling the sensors, wiring and checking the software for manipulation. However, this was not necessary in Daun.

Pictures will follow

14.09.2020



Current pictures, videos and news can now also be viewed on Facebook. Here are pictures from our first fair in 2020

Facebook

01.09.2020


The first fair is the CYCLINGWORLD in Düsseldorf. From August 16th to 18th you can try out the new SPEED-Bull. Due to the current corona situation, you can register as a trade visitor.

10.07.2020



The new founded TRAKTAL GmbH will take over all customer business in the future. The increased customer contacts through the Speed-Bull and the associated financing made this step necessary. The technical development and production will continue to be carried out by Traktal Marx e.K.. Current business, support, warranty or rental contracts remain unaffected.

01.02.2020



The new "Speed-Bull" is available!

The first universal test bench for repair shops and professionals. Perfect for testing, pedelecs and small scooters.

More: www.speed-bull.com

06.04.2019



Here is the URT, the Universal Milage Test for pedelecs, s-pedelecs and e-MTB: URT

Attention! Due to updates and changes in the name server, there may be short-term interruptions!

12.01.2019



A new generation of engine test stands is available. For e-bike engines up to 1 kW, driver power> 500 W and cadence over 120 1 / min. On request also with integrated temperature chamber (-20 bis +50 °C)

06.04.2018



A new test bench for e-scooter is ready!

10.10.2016



The new web site is online! Easy to understand, more compact, safe, better to maintain and made for the mobile use.

10.04.2016

. . .

deutsch english Facebook
Back